Editing The Deconstitutor (section)

===MAINTENANCE===
TROUBLESHOOTING YOUR DECON UNIT <br> 
The decon unit's many fail-safes and warning systems are not solely reliant on your interface system. Run diagnostics on all four autonomous security systems regularly.
* Casing resin should be monitored before every deconstitution. Replace or refill casing resin when CASING RESIN INDICATOR reads yellow. 
* Replace your water filter every 3 months or 25 uses. Do not use the deconstitutor when WATER FILTER INDICATOR reads red. 
* Clean your water tank thoroughly with a lacrimae-based cleaning product every 3 months. If the interface computer consistently reads collected water as below purity tolerance, and your filter is in good order, you probably need to clean your tank. 
* The decon unit's built-in scanner is monitored by the interface system as well as an autonomous security failsafe computer located at the base of the polyaluminite enclosure. We recommend running diagnostics on the failsafe computer every 5 uses of your decon unit. Additionally, the scanner's instrument calibrations can gradually corrupt over time. Use the DECON UNIT SCANNING CALIBRATION KIT included with your decon unit to test and calibrate your scanner every 10-12 uses. 
Have your scanner replaced or repaired by a professional when the SCANNER INDICATOR reads red, or if the interface system reports any error numbered 602 to 699.